Embedded Files
Wexler manufactures the GENCON™ Gen-Set controller and its ancillary devices.
Technical support:
Google Voice: +1 (551) 333-9391 (SMS enabled)
Google Mail: info@gencon.info, sales@gencon.info
NEWS!
COMM2 PRO now logs events. From firmware 1.50 (the build without the annunciation panel) the Communicator keeps a logbook of the last 2048 events on its network, each with its date and time. It enters every report a GENCON™ logs, and what it sees each unit do: start or stop, shut down or reset, go on or off load, become bus master, join or leave the network.
With GMESS, one key in gpane reads the logbook and opens it in a spreadsheet, each report in the words of the unit's own firmware. A PLC or SCADA system reads it as Modbus holding registers. Firmware 1.50 comes with the current GMESS: see the Software page.
COMM3 is a control and monitoring hub for power plants that employ multiple "all-in-one" GENCON™ genset controllers. COMM3 software is based on the real-time branch of the Linux operating system. In the following screenshot of the 7" touchscreen we see that in 24 seconds genset A1 would be started to reduce the load of genset B2, the genset selected for display:
Figure 1: The blue homepage
COMM3 expands and improves on the following GENCON functions:
Load sharing
Genset management
Event logging
Data scope
Communication
Intranet: Modbus/TCP slave
Internet: MQTT/TCP client
Page updated
Report abuse